changed the admin config organization around a bit

--HG--
extra : convert_revision : svn%3A39bc706e-5318-0410-9160-8a85361fbb7c/trunk%40337

configs/admins.cfg

@@ -0,0 +1,31 @@
+
+/**
+ * USE THIS SECTION TO DECLARE DETAILED ADMIN PROPERTIES.
+ *
+ * Each admin should have its own "Admin" section, followed by a name.
+ * The name does not have to be unique.
+ *
+ * Available properties: (Anything else is filtered as custom)
+ *      "auth"          - REQUIRED - Auth method to use.  Built-in methods are:
+ *                        "steam"  - Steam based authentication
+ *                        "name"   - Name based authentication
+ *                        "ip"	- IP based authentication
+ *                        Anything else is treated as custom.
+ *
+ *      "identity"      - REQUIRED - Identification string, for example, a steamid or name.
+ *      "password"      - Optional password to use.
+ *      "group"         - Inherits a set of group permissions.
+ *      "flags"         - Adds a set of flags.  
+ *
+ * Example:
+	"BAILOPAN"
+	{
+		"auth"			"steam"
+		"identity"		"STEAM_0:1:16"
+		"flags"			"abcdef"
+	}
+ *
+ */
+Admins
+{
+}

configs/admins_groups.cfg

@@ -0,0 +1,77 @@
+/**
+ * Use this section to tweak admin permission levels and groupings.
+ * You can also define admin roles in this section.
+ */
+Levels
+{
+	/**
+ 	 * These are the default role flag mappings.
+ 	 * You can assign new letters for custom purposes, however you should
+ 	 * not change the default names, as SourceMod hardcodes these.
+ 	 */
+	Flags
+	{
+		"reservation"		"a"
+		"kick"			"b"
+		"ban"			"c"
+		"unban"			"d"
+		"slay"			"e"
+		"changemap"		"f"
+		"cvars"			"g"
+		"configs"			"h"
+		"chat"			"i"
+		"vote"			"j"
+		"password"		"h"
+		"rcon"			"i"
+		
+		//Custom flags START
+		//Custom flags END
+		
+		//Note - root is a magic access flag that grants all permissions.
+		"root"			"z"
+	}
+	
+	/**
+	 * By default, commands are registered with three pieces of information:
+	 * 1)Command Name 		(for example, "csdm_enable")
+	 * 2)Command Group Name		(for example, "CSDM")
+	 * 3)Command Level		(for example, "changemap")
+	 * You can override the default flags assigned to individual commands or command groups in this way.
+	 * To override a group, use the ":" character before the name.  Example:
+	 * Examples:
+	 *		":CSDM"		"i"		// Override the CSDM group
+	 * 		"csdm_enable"	"j"		// Override the csdm_enable command
+	 * Note that for overrides, order is important.  In the above example, csdm_enable overwrites
+	 * any setting that csdm_enable previously had.
+	 */
+	Overrides
+	{
+	}	
+}
+
+Groups
+{
+	/**
+	 * Allowed properties for a group:
+	 *
+	 *   "flags"           - Flag string.
+	 *   "inherit"         - Inherits permissions from another group.
+	 *   "immunity"        - Specifies a group to be immune to.  Use "*" for all or "$" for users with no group.
+	 *				     NOTE: No one, even a root user, is immune from other root users.
+	 */
+	"Full Admins"
+	{
+		/**
+		 * You can override commands and command groups here.
+		 * Specify a command name or group and either "allow" or "deny"
+		 * Examples:
+		 * 		":CSDM"		"allow"
+		 *		"csdm_enable"	"deny"
+		 */
+		 Commands
+		 {
+		 }
+		"flags"			"abcdefghiz"
+		"immunity"		"*"
+	}
+}

configs/admins_simple.ini

@@ -2,12 +2,12 @@
  * READ THIS CAREFULLY! SEE BOTTOM FOR EXAMPLES
  *
  * For each admin, you need two settings:
- *  "identity"		"permissions"
+ *  "identity"		"permissions"		"password"
  *
  * For the Identity, you can use a SteamID, IP address, or Name (the type will be auto-detected).
  * For the Permissions, you can use a flag string or group (read below), and an optional password.
  *
- * There are 26 flags (a-z), and each flag has a specific meaning/role.
+ * There are 13 flags (a-i,z), and each flag has a specific meaning/role.
  * For example, the "b" flag means "kick permissions."
  *
  * You can combine flags into a string like this:
@@ -29,13 +29,11 @@
 		"rcon"			"i"		//Use RCON
 		"root"			"z"		//All permissions
  *
- * NOTE: If you specify a - in a flag string, each subsequent flag will be subtracted instead of added.
- *       You can specify a + to "undo" this in the same string.
  *
  * Examples:
  *   "STEAM_0:1:16"		"bce"			//kick, ban, slay for this steam ID
  *   "127.0.0.1"		"z"			//all permissions for this ip
- *   "BAILOPAN"			"mypassword:abc"	//name BAILOPAN, password "mypassword" gets reservation, kick, ban
+ *   "BAILOPAN"			"abc"	"Gab3n"		//name BAILOPAN, password "Gab3n": gets reservation, kick, ban
  *
  ***************************************/
  

configs/permissions.cfg

@@ -1,124 +0,0 @@
-
-/**
- * USE THIS SECTION TO DECLARE DETAILED ADMIN PROPERTIES.
- *
- * Each admin should have its own "Admin" section, followed by a name.
- * The name does not have to be unique.
- *
- * Available properties: (Anything else is filtered as custom)
- * 	"auth"          - REQUIRED - Auth method to use.  Built-in methods are:
- *                        "steam"  - Steam based authentication
- *                        "name"   - Name based authentication
- *                        "ip"	   - IP based authentication
- *                        Anything else is treated as custom.
- *
- *      "identity"      - REQUIRED - Identification string, for example, a steamid or name.
- *      "password"      - Optional password to use.
- *      "group"         - Inherits a set of group permissions.
- *      "flags"         - Inherits a set of flags.
- *      "immunity"      - Sets an immunity to a group (* for all, empty string for default users)
- *      CommandGroups	- See the Permissions section.
- *      Commands        - See the Permissions section.
- *
- * Example:
-	"BAILOPAN"
-	{
-		"auth"			"steam"
-		"identity"		"STEAM_0:1:16"
-		"flags"			"abcdef"
-	}
- *
- */
-Admins
-{
-}
-
-
-/**
- * Use this section to tweak admin permission levels and groupings.
- * You can also define admin roles in this section.
- */
-Levels
-{
-	/**
- 	 * These are the default role flag mappings.
- 	 * You can assign new letters for custom purposes, however you should
- 	 * not change the default names, as SourceMod hardcodes these.
- 	 */
-	Flags
-	{
-		"reservation"		"a"
-		"kick"			"b"
-		"ban"			"c"
-		"unban"			"d"
-		"slay"			"e"
-		"changemap"		"f"
-		"cvars"			"g"
-		"configs"		"h"
-		"chat"			"i"
-		"votes"			"j"
-		"password"		"h"
-		"rcon"			"i"
-		
-		//Custom flags START
-		//Custom flags END
-		
-		//Note - root is a magic access flag that grants all permissions.
-		"root"			"z"
-	}
-	
-	/**
-	 * By default, commands are registered with three pieces of information:
-	 * 1)Command Name 		(for example, "csdm_enable")
-	 * 2)Command Group Name		(for example, "CSDM")
-	 * 3)Command Level		(for example, "changemap")
-	 * You can override the default flags assigned to individual commands or command groups in this way.
-	 * You can specify either a one-character, lower-case flag, or a named flag from "Levels."
-	 * Examples:
-	 *		"CSDM"		"i"
-	 * 		"csdm_enable"	"j"
-	 */
-	Overrides
-	{
-		CommandGroups
-		{
-		}
-		Commands
-		{
-		}
-	}	
-}
-
-Permissions
-{
-	
-	//Lastly, you can define groups for admins.  This helps organize large admin lists.
-	Groups
-	{
-		/**
-		 * Allowed properties for a group:
-		 *
-		 *   "flags"           - Flag string (you can use -/+ as allowed earlier).
-		 *   "inherit"         - Inherits permissions from another group.
-		 *   "immunity"        - Specifies a group to be immune to.  Use "*" for all or "" for users with no group.
-		 *                       Note: You can use - to strip immunity from a group, in the case of inheritance.
-		 */
-		"Sample"
-		{
-			/**
-			 * You can override commands and command groups here.
-			 * Specify a command name or group and either "allow" or "deny"
-			 * You can have multiple entries for both sections in order to override/tweak them.
-			 * Examples:
-			 * 		"CSDM"		"allow"
-			 *		"csdm_enable"	"deny"
-			 */
-			CommandGroups
-			{
-			}
-			Commands
-			{
-			}
-		}
-	}
-}